Camera Kit for Adventurer 5M Series

Camera Kit for Adventurer 5M Series

Sale price$65.99 AUD

Camera kit for Flashforge Adventurer 5M series, enabling real-time monitoring and enhancing your 3D printing experience.

FAQ

1. Use a specific nozzle for each material, especially for Carbon Fiber and PETG, to avoid nozzle clogs caused by material mixing.

2. After printing with high-temp filament, switch to low-temp filament, please set a higher temperature to clean the nozzle residue.

3. After replacing the nozzle or moving the platform, please re-level the 3D printer.

When selecting a nozzle size for the FlashForge Adventurer 5M, consider the following factors to choose between 0.25mm, 0.4mm, 0.6mm, and 0.8mm nozzles:

1. Printing Detail and Precision

  • 0.25mm Nozzle: Ideal for highly detailed models or small prints. It provides fine resolution but prints slower.
  • 0.4mm Nozzle: The standard choice, balancing detail and speed. Suitable for most general-purpose printing tasks.

2. Printing Speed

  • 0.6mm and 0.8mm Nozzles: These are better for faster printing, especially for larger objects or functional parts where fine detail is less critical.

3. Material Type

  • 0.25mm Nozzle: Works well with standard materials like PLA but may clog more easily with abrasive or composite materials.
  • 0.6mm and 0.8mm Nozzles: Better suited for abrasive materials (e.g., carbon fiber-filled filaments) or thicker layers.

4. Layer Height and Strength

  • 0.25mm Nozzle: Best for thin layers and delicate prints.
  • 0.6mm and 0.8mm Nozzles: Allow for thicker layers, resulting in stronger prints but with less surface detail.

5. Project Requirements

  • Choose the 0.4mm nozzle for a good balance of speed, detail, and versatility.
  • Use the 0.25mm nozzle for intricate designs or miniatures.
  • Opt for the 0.6mm or 0.8mm nozzle for large, functional parts or faster prototyping.

Customer Reviews

Based on 28 reviews
82%
(23)
18%
(5)
0%
(0)
0%
(0)
0%
(0)
N
Neil Ide
Easy install, decent performance

The parts came in and installed very easily. Sometimes the app doesn’t activate the camera when pushing the play button but it does ultimately turn on. There is a decent bit of lag in the signal but it is effective enough to know if the print is going well or not.

m
matthew olerhead
Easy install handy addition

A worthwhile and ease 1 screw plug and play addition to the Adventurer 5m.

L
Laura Crandle
Camera

This was very easy to install works perfectly.

E
Emily Valdez
Camera kit

It perfectly on my machine. Clear picture after I set it up!!

R
Roy

Works great. A tiny laggy but great.