Flexible Build plate Kit for Flashforge Creator Pro 2 3D Printer
3 reviews
3 reviews

Flexible Build Plate Assembly for Flashforge Creator Pro 2 3D Printer

$45.00 AUD

Flexible build plate kit for Flashforge Creator Pro 2, designed to improve print adhesion and simplify print removal for a seamless 3D printing experience.

FAQ

1. Use a specific nozzle for each material, especially for Carbon Fiber and PETG, to avoid nozzle clogs caused by material mixing.

2. After printing with high-temp filament, switch to low-temp filament, please set a higher temperature to clean the nozzle residue.

3. After replacing the nozzle or moving the platform, please re-level the 3D printer.

When selecting a nozzle size for the FlashForge Adventurer 5M, consider the following factors to choose between 0.25mm, 0.4mm, 0.6mm, and 0.8mm nozzles:

1. Printing Detail and Precision

  • 0.25mm Nozzle: Ideal for highly detailed models or small prints. It provides fine resolution but prints slower.
  • 0.4mm Nozzle: The standard choice, balancing detail and speed. Suitable for most general-purpose printing tasks.

2. Printing Speed

  • 0.6mm and 0.8mm Nozzles: These are better for faster printing, especially for larger objects or functional parts where fine detail is less critical.

3. Material Type

  • 0.25mm Nozzle: Works well with standard materials like PLA but may clog more easily with abrasive or composite materials.
  • 0.6mm and 0.8mm Nozzles: Better suited for abrasive materials (e.g., carbon fiber-filled filaments) or thicker layers.

4. Layer Height and Strength

  • 0.25mm Nozzle: Best for thin layers and delicate prints.
  • 0.6mm and 0.8mm Nozzles: Allow for thicker layers, resulting in stronger prints but with less surface detail.

5. Project Requirements

  • Choose the 0.4mm nozzle for a good balance of speed, detail, and versatility.
  • Use the 0.25mm nozzle for intricate designs or miniatures.
  • Opt for the 0.6mm or 0.8mm nozzle for large, functional parts or faster prototyping.

Customer Reviews

Based on 3 reviews
67%
(2)
0%
(0)
0%
(0)
0%
(0)
33%
(1)
M
Mike Mingay, Mike Mingay
product incorrectly advertised

The advertised product seemed ideal especially as a previous positive review related to the Flashforge Dreamer print. However, there was no mention of the need to use the supplied clips (NOT mentioned in the online product description) in the event of printing large prints OR if the bed temperature is above 70C. As I predominately print ABS that requires a bed temperature of around 105C and as the Dreamer has twin nozzles the clips cannot be used because the nozzles will clash with the clips. I contacted support and was eventually told that refunds are not given on accessories despite the fact that the product is not fit for purpose. This is the second time I have tried to submit a review. It is now in the hands of PayPal,

D
D.M.
Perfect for me, Flashforge Dreamer

This was perfect, shipping was really quick and free, it was relatively cheap compared to other places, even though its designed for the creator pro, it shares the same buildplate dimensions as the Flashforge Dreamer so it worked nicely out of the box. However, I ended up taking off the handle, so instead of a plastic handle its just a metal, because it was hitting one of the extruders when i was levelling the bed, but after i took it off it was perfect, and it still functions as a handle even without the plastic cover.

B
Brian Hamill
Works as described.

Works as described.